A dual-core NMR system for field-cycling singlet assisted diffusion NMR.

Long-lived singlet spin order offers the possibility to extend the spin memory by more than an order of magnitude. This enhancement can be used, among other applications, to assist NMR diffusion experiments in porous media where the extended lifetime of singlet spin order can be used to gain information about structural features of the medium as well as the dynamics of the imbibed phase. Other than offering the possibility to explore longer diffusion times of the order of many minutes that, for example, gives unprecedented access to tortuosity in structures with interconnected pores, singlet order has the important advantage to be immune to the internal field gradients generated by magnetic susceptibility inhomogeneities. These inhomogeneities, however, are responsible for very short T2 decay constants in high magnetic field and this precludes access to the singlet order in the first instance. To overcome this difficulty and take advantage of singlet order in diffusion experiments in porous media, we have here developed a dual-core system with radiofrequency and 3-axis pulsed field gradients facilities in low magnetic field, for preparation and manipulation of singlet order and a probe, in high magnetic field, for polarisation and detection. The system operates in field-cycling and can be used for a variety of NMR experiments including diffusion tensor imaging (both singlet assisted and not). In this paper we present and discuss the new hardware and its calibration, and demonstrate its capabilities through a variety of examples.

Dedicated NMR sensor to analyze relaxation and diffusion in liquids and its application to characterize lubricants.

A dedicated nuclear magnetic resonance (NMR) sensor was designed for the analysis of liquids. The magnets are arranged in a V shape, creating a spatially dependent magnetic field in the gap. Measurements of samples with diverse diameters are possible underdefined magnetic field gradients at a given position. The magnet thus combines properties of single sided NMR with high static magnetic field gradients and classical time domain (TD) devices with lower to almost zero gradients. The sensor can easily be adapted to the requirements of the considered investigation; probes can be customized. On the example of lubricants and their aging, the added value and applicability of this sensor in quality control are highlighted in this publication. Relaxation and diffusion were measured by Carr-Purcell-Meiboom-Gill (CPMG) while varying the echo time τe and quantified via numerical modeling. Especially, relaxation shows a high sensitivity towards aging of lubricants such as particulate abrasion and changes in molecular dynamics induced, for example, by additive depletion. The applicability of this NMR sensor in quality control is demonstrated on the example of engine and transmission oils as well as of lubrication greases.

The effect of hydrogen bonding on diffusion and permeability in UV-cured Polyacrylate-based networks for controlled release.

Polyacrylates are important polymers widely used in pharmaceutical industry such as drug coatings due to their low cost, processability and ease of functionalisation. Chemical functionalities (e.g. H-bonding) can be easily included to modulate the transport of low molecular weight drug-like entities through the network. Understanding how such microscopic structural modifications determine macroscopic diffusion is critical for designing next generation responsive polymers. In this study pulsed field gradient (PFG) 1H NMR measurements of the self-diffusion of a dye molecule (Eosin Y) in a series of polyacrylate networks with differing H-bonding strength were undertaken; it was found that the diffusion of Eosin Y is significantly reduced in networks with H-bonding. Detailed analyses by 1H NMR relaxometry and double quantum (DQ) NMR show that H-bonding can also reduce polymer chain mobility. Furthermore, DSC thermoporometry showed a significant increase in the average network mesh size potentially due to the pre-organization of H-bonding containing monomer during network curing. By introducing the H-bonding disrupter, LiClO4, it was found that the diffusivity of solute becomes positively correlated to the average mesh size across the series of networks. Hence, a modified diffusion model based on hydrodynamic theory is proposed to separate the direct (solute-network) H-bonding contribution to solute diffusion from the indirect contribution arising from monomer pre-ordering induced mesh size reduction. Finally, it is shown that the same direct and indirect contributions to microscopic diffusivity, arising from the H-bond strength of the co-monomers, also contribute significantly to the macroscopic membrane permeability which is similarly subject to H-bond disruption.

Li10SnP2S12: an affordable lithium superionic conductor.

The reaction of Li2S and P2S5 with Li4[SnS4], a recently discovered, good Li(+) ion conductor, yields Li10SnP2S12, the thiostannate analogue of the record holder Li10GeP2S12 and the second compound of this class of superionic conductors with very high values of 7 mS/cm for the grain conductivity and 4 mS/cm for the total conductivity at 27 °C. The replacement of Ge by Sn should reduce the raw material cost by a factor of ~3.

Synthesis, characterization, and evaluation of pluronic-based ß-cyclodextrin polyrotaxanes for mobilization of accumulated cholesterol from Niemann-Pick type C fibroblasts.

Several lines of evidence suggest that ß-cyclodextrin (ß-CD) derivatives initiate the efflux of accumulated, unesterified cholesterol from the late endosomal/lysosomal compartment in Niemann Pick C (NPC) disease models. Unfortunately, repeated injections or continuous infusions of current ß-CD therapies are required to sustain suppression of symptoms and prolong life. In an effort to make CD treatment a more viable option by boosting efficacy and improving pharmacokinetics, a library of Pluronic surfactant-based ß-CD polyrotaxanes has been developed using biocompatible poly(ethylene glycol) (PEG)-polypropylene glycol (PPG)-PEG triblock copolymers. These compounds carry multiple copies of ß-CD as shown by (1)H NMR, 2D nuclear Overhouser effect spectroscopy, gel permeation chromatography/multiangle light scattering, analytical ultracentrifugation analysis, matrix assisted laser desorption/ionization mass spectrometry, and diffusion-ordered spectroscopy. Analyses of free ß-cyclodextrin contamination in the compounds were made by reverse phase high pressure liquid chromatography and hydrophilic interaction liquid chromatography. Dethreading kinetics were studied by reverse phase high pressure liquid chromatography, UV/vis, and (1)H NMR analysis. Filipin staining studies using npc2(-/-) fibroblasts show significant reversal of cholesterol accumulation after treatment with polyrotaxane compounds. The rate and efficacy of reversal is similar to that achieved by equivalent amounts of monomeric ß-CD alone.

Microfluidic preparation and self diffusion PFG-NMR analysis of monodisperse water-in-oil-in-water double emulsions.

Monodisperse water-in-oil-in-water (WOW) double emulsions have been prepared using microfluidic glass devices designed and built primarily from off the shelf components. The systems were easy to assemble and use. They were capable of producing double emulsions with an outer droplet size from 100 to 40 µm. Depending on how the devices were operated, double emulsions containing either single or multiple water droplets could be produced. Pulsed-field gradient self-diffusion NMR experiments have been performed on the monodisperse water-in-oil-in-water double emulsions to obtain information on the inner water droplet diameter and the distribution of the water in the different phases of the double emulsion. This has been achieved by applying regularization methods to the self-diffusion data. Using these methods the stability of the double emulsions to osmotic pressure imbalance has been followed by observing the change in the size of the inner water droplets over time.

Structure, diffusion, and permeability of protein-stabilized monodispersed oil in water emulsions and their gels: a self-diffusion NMR study.

Self-diffusion NMR is used to investigate monodispersed oil in water emulsions and the subsequent gel formed by removing the water through evaporation. The radius of the oil droplets in the emulsions is measured using a number of diffusion methods based on the measurement of the mean squared displacement of the oil, water, and tracer molecules. The results are consistent with the known size of the emulsions. Bragg-like reflections due to the restricted diffusion of the water around the oil droplets are observed due to the low polydispersity of the emulsions and the dense packing. The resulting data are fitted to a pore glass model to give the diameter of both the pools of interstitial water and the oil droplets. In the gel, information on the residual three-dimensional structure is obtained using the short time behavior of the effective diffusion coefficient to give the surface to volume ratio of the residual protein network structure. The values for the surface to volume ratio are found to be consistent with the expected increase of the surface area of monodisperse droplets forming a gel network. At long diffusion observation times, the permeability of the network structure is investigated by diffusion NMR to give a complete picture of the colloidal system considered.

Studying lateral diffusion in lipid bilayers by combining a magic angle spinning NMR probe with a microimaging gradient system.

An alternative technique for studying the lateral diffusion in lipid membranes using pulsed field gradients in combination with magic angle spinning is presented. It is shown that MAS probes inserted in a microimaging device that produce high field gradients can be used to monitor also slow diffusion processes. As an example, measurements of the lateral diffusion of lipids embedded in the bilayer of a cubic phase are presented.